Precision-9 Compass

£610.00

Supplies heading and rate-of-turn information to B&G autopilot, radar and navigation systems

  • Heading, Rate Of Turn (ROT), roll, and pitch output over NMEA 2000®
  • Heading and ROT calculated using sensor data from 9 axes of rotation and motion
  • Accurate and reliable solid-state sensor technology
  • Heading accuracy of ±2° after calibration
  • Easily adjustable mounting bracket allows bulkhead or up-mast installation
  • Simple installation with a single NMEA 2000® connection
SKU: 000-12607-001 Categories: , , ,

The Precision-9 Compass supplies heading and rate-of-turn information to B&G instrument, autopilot, radar and navigation systems. Incorporating a nine-axis array of solid-state motion and orientation sensors, the Precision-9 also provides accurate roll, pitch and heave data to compatible equipment via its NMEA 2000® interface. An adjustable mounting bracket and single-cable connection allow simple and cost-effective installation aboard any vessel, including an up-mast mounting option suitable for steel hulls.

NMEA 2000® Heading & ROT Output
With NMEA 2000® output, the Precision-9 Compass provides heading, Rate Of Turn (ROT), roll and pitch information to connected equipment including autopilot, instruments, radar, multifunction displays, and other navigational systems.

Solid-State Sensor Technology
The Precision-9 Compass incorporates a solid-state sensor array based on MEMS technology. This high-precision array measures motion on nine separate axes: heading, heel, trim, roll, pitch, yaw, surge and sway. Data from all nine axes is used to calculate the most accurate heading and rate-of-turn information possible, avoiding many common limitations of conventional fluxgate electronic compasses and delivering heading accuracy of ±2 degrees after calibration.

Mount Almost Anywhere
An easily adjustable mounting bracket and single-cable NMEA 2000® connectivity allow the Precision-9 Compass to be installed on any vessel, in almost any location. The compass may also be mounted directly to any flat surface without a bracket. On steel hulled vessels where magnetic interference makes bulkhead mounting unsuitable, an IPX7 waterproof rating allows external up-mast installation.

Visit the software downloads area to check for software updates for this product.

HV Mounting Templates

130.81 KB 70 downloads

Precision 9 Mounting Template

0.00 KB 32 downloads

Precision 9 Install Guide

0.00 KB 88 downloads

Sonichub2 Install Guide

0.00 KB 47 downloads

WiFi-1 Install Guide

4.87 MB 1666 downloads

ZC1 User Guide

0.00 KB 20 downloads

ZC2 User Guide

5.33 MB 180 downloads

ZC2 Flush Mounting Template

0.00 KB 15 downloads

ZC2 Mounting Template

0.00 KB 18 downloads
    + Description

    The Precision-9 Compass supplies heading and rate-of-turn information to B&G instrument, autopilot, radar and navigation systems. Incorporating a nine-axis array of solid-state motion and orientation sensors, the Precision-9 also provides accurate roll, pitch and heave data to compatible equipment via its NMEA 2000® interface. An adjustable mounting bracket and single-cable connection allow simple and cost-effective installation aboard any vessel, including an up-mast mounting option suitable for steel hulls.

    NMEA 2000® Heading & ROT Output
    With NMEA 2000® output, the Precision-9 Compass provides heading, Rate Of Turn (ROT), roll and pitch information to connected equipment including autopilot, instruments, radar, multifunction displays, and other navigational systems.

    Solid-State Sensor Technology
    The Precision-9 Compass incorporates a solid-state sensor array based on MEMS technology. This high-precision array measures motion on nine separate axes: heading, heel, trim, roll, pitch, yaw, surge and sway. Data from all nine axes is used to calculate the most accurate heading and rate-of-turn information possible, avoiding many common limitations of conventional fluxgate electronic compasses and delivering heading accuracy of ±2 degrees after calibration.

    Mount Almost Anywhere
    An easily adjustable mounting bracket and single-cable NMEA 2000® connectivity allow the Precision-9 Compass to be installed on any vessel, in almost any location. The compass may also be mounted directly to any flat surface without a bracket. On steel hulled vessels where magnetic interference makes bulkhead mounting unsuitable, an IPX7 waterproof rating allows external up-mast installation.

    + Specs
    + Reviews
    + Software

    Visit the software downloads area to check for software updates for this product.

    + Documents

    HV Mounting Templates

    130.81 KB 70 downloads

    Precision 9 Mounting Template

    0.00 KB 32 downloads

    Precision 9 Install Guide

    0.00 KB 88 downloads

    Sonichub2 Install Guide

    0.00 KB 47 downloads

    WiFi-1 Install Guide

    4.87 MB 1666 downloads

    ZC1 User Guide

    0.00 KB 20 downloads

    ZC2 User Guide

    5.33 MB 180 downloads

    ZC2 Flush Mounting Template

    0.00 KB 15 downloads

    ZC2 Mounting Template

    0.00 KB 18 downloads